ER-A280F/N Operation-Manual GB

Selecting an Operating Mode

When you turn the register on and press the

key, the mode selection window will appear on the display,

listing available operating modes as shown below.

Mode selection window

Operating Modes

You can select any mode other than REG from the list in the mode selection window. Your register supports

the following operating modes:

This mode allows you to enter various sales information. The mode selection window does

not list this mode. To select this mode from the mode selection window, press the

key.

This mode allows servers to take X or Z reports on their sales information.

This mode locks all operations of the register. When you select this mode, the window will

disappear. Pressing any key turns the register ON.

This mode is used to take various daily total reports (X1/Z1 reports).

This mode is used to take various weekly or monthly reports (X2/Z2 reports).

This mode allows you to program those items which need to be changed often such as

unit prices and discount percentages.

This mode allows you to program those items which can be programmed in the PGM1

mode and do not require frequent changes such as date, time, and terminal functions.

This mode allows you to program AUTO menu key and automatic sequencing keys.

This mode allows you to save and load the data of your register to and from an SD card.

REG mode

OP XZ mode

OFF mode

X1/Z1 mode

X2/Z2 mode

PGM1 mode

PGM2 mode

AUTO KEY mode

SD CARD mode

ER-A280F_N(SEEG)(E)-2 09.6.18 6:50 AM Page 21