Operation Manual, Cloud Connect Guide

15
Cloud Connect Guide
Print settings
You can print from an application that supports Google Cloud Print.
Functions that can be enabled from the application are as follows.
*1Depending on the model, this item may not be available.
*2Depending on the model, the sizes that can be selected may be restricted.
*3Can be used when an inner finisher, finisher, or saddle stitch finisher is installed.
Set address without using proxy
In "Settings (administrator)", select [System Settings] → [Network Settings] → [Proxy Setting] → [Address without Using
Proxy].
Specify exception addresses for a proxy that is used in the external service connect function and Google Cloud Print.
[Entry method]
1) Can be set using a host name or an IP address.
2) When using a host name, you can use a wildcard (*) at the beginning of the domain name.
(Example: "*example.□□□" (equivalent to "example.□□□", "sub.example.□□□", "subexample.□□□", etc.)
3) When using an IP address, you can use a wildcard (*) at the end of the address.
(Example: "10*" (equivalent to 100.nnn.nnn.nnn to 109.nnn.nnn.nnn)
If the Sharp OSA application using "HTML Browser 3.5" is set to an exception address, rule (3) cannot be used.
4) You can use a separator (semicolon (;)) to enter multiple addresses.
(Example: "99.99.99.99;example.□□□")
Item Description
Print Color Auto, Black & White, Color
2-Sided Print None, Book, Tablet
Orientation Portrait, Landscape
Copies 1-999
Resolution 600x600, 1200x1200*
1
Fit Page On, Off
Page Select -
Paper Size*
2
A4, A3, A5, B4, B5, A3W, Ledger, Legal, Letter, Invoice, Executive, Foolscap, 8 1/2 x
13 2/5, 216 x 343, 8K, 16K
Paper Tray Varies depending on the machine configuration
Output Tray Center Tray, Right Tray, Upper Tray, Middle Tray, Lower Tray
Print per Unit On, Off
Staple*
3
On, Off
Google Cloud Print uses the XMPP (5222) port or HTTPS (443) port for communication.
Check the settings for restriction of access from the Internet, the machine administrator password, and mDNS as needed.