Manualshelf

Operation Manual, User's Manual

ManualsBrandsSharp ManualsLCD MonitorER58CC
371372373374375376377378379380
4-37
FACSIMILE►BASIC TRANSMISSION METHODS
TRANSMISSION USING THE SPEAKER
When the speaker is used to dial, the fax is sent after the number is dialled and the connection is established.
• If a person answers, you will be able to hear his or her voice, but you will not be able to speak.
• When the speaker is used, transmission takes place without scanning the original into memory.
• A destination that includes an F-code (sub-address and passcode) cannot be used.
• A one-touch key that has multiple destinations or has a non-fax destination cannot be used.
• In speaker mode, the [Preview] key cannot be used for transmission.
1
Tap the [Detail] key to change to normal mode.
► CHANGING MODES (page 1-11)
2
Place the original.
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
► AUTOMATIC DOCUMENT FEEDER (page 1-107)
► DOCUMENT GLASS (page 1-109)
3
Tap the [Speaker] key.
When the connection is established, you will hear the dial
tone through the machine's speaker.
Tapping allows you to use the slider or keys to adjust the volume of the speaker.
4
Specify the destination fax number.
• Entering a destination number using the numeric keys ►page 4-12
• Retrieving a destination from an address book ►page 4-14
• Using a search number to retrieve a destination ►page 4-17
• Using a transmission log to resend ►page 4-20
A one-touch key in which multiple destinations are stored cannot be used.
5
When the connection is made, tap the [Start] key to begin transmission.
To cancel transmission:
To stop transmission, tap the [Sending Cancelled] key. To stop communication, tap the [Speaker] key.