Instruction manual

43
10. Downloading the contents of the remote printer
programming to satellites — master
When you have completed the remote printer programming, you can distribute the preset data
from the master to all satellites in the IRC system.
1. Enter the PGM2 mode.
2. Select “INITIAL D/L” and press the [ENTER] key.
3. The INITIAL D/L menu will open. Select “KP PRESET”
and press the [ENTER] key.
4. If you wish to download the KP PRESET data to all
satellites, select “ALL” and press the [ENTER] key. If
you wish to download the data to certain satellite(s),
select “MACHINE SELECT” and press the [ENTER]
key. In this case, the MACHINE SELECT menu will
open. Move the cursor to the machine numbers and
select “YES.”
NOTE
Check if all the satellites in the IRC system have received the preset data for the remote printer.