Instruction manual
23
4. Individual reports — master/back-up master/satellite
(1) Report generation procedure
To generate respective reports, use the following procedure, referring to the list of individual
reports on the following pages.
1.
Select the required operating mode (OP XZ, X1, Z1,
X2 or Z2) from the mode selection menu and press
the [ENTER] key.
2.
Select INDIVIDUAL and press the [ENTER] key.
3.
Select the type of report you wish to generate and
press the [ENTER] key. (If the desired type of report is
not listed on the display, scroll up or down the
screen.)
4.
If you need to enter data to generate the report, follow
the instructions given on the display for entry.