Service manual
ER-A410U/ER-A420U SPECIFICATIONS
– 4 –
■
■■
■Operator display
The operator display consists of a two-line dot-matrix display (16 char-
acters/line).
• Cashier code or mode displayed
The mode that the key is placed in is displayed. When a cashier is
assigned, the cashier code is displayed in the REG or OP X/Z
mode. For example, “0001” is displayed when the cashier 0001 is
assigned.
• Repeat
The number of repeats is displayed, starting at "2" and increments
with each repeat. When you have registered ten times, the display
will show "0". (2 3 3......9 3 0 3 1 3 2...)
• Sentinel mark
When amounts in the drawer reaches the amount you prepro-
grammed, the sentinel mark "X" is displayed to advice you to
remove the money and take it to a safe place.
• Power save mark
When the cash register goes into the power save mode, the power
save mark (decimal point) is displayed.
• Stock alarm indicator
When the stock of the PLU which has been entered is zero or neg-
ative, the alarm indicator (decimal point) is displayed.
• Function message display area
Item labels of Departments PLU/subdepartments and function text
you use, such as %1, (–) and CASH are displayed here. For the
details of function texts, please refer to pages 112 and 113.
When an amount entry is required, “- - - - - - -” is displayed in the
numeric entry display area with "AMOUNT". When a preset price
has been set, the price is displayed in the numeric entry display
area as the "AMOUNT".
• Numeric entry display area
Numbers entered using numeric keys are displayed here.
Date and time display
The Date and time appear on the display in the OP X/Z, REG, or
MGR mode. In the REG or MGR mode, press the [#] key to display
the date and time.
Error messages
When an error occurs, the corresponding error message is displayed
in the function message display area.
■
■■
■Customer display (Pop-up type)
6. PRINTER
6-1. PRINTER
6-2. PAPER
6-3. LOGO STAMP
• The Graphic type Logo is used
6-4. CUTTER
• Method: Manual
Function message
display area
Cashier
code or
mode name
Numeric entry
display area
Receipt OFF indicator ("_")
/
Stock alarm indicator (" ")
Repeat
/
Sentinel mark
/
Power save mark
Dept. name
/
PLU name
/
function te
xt
Price level
/
PLU level
(e.g.
P2L3)
$ ( :
Appears right below the seventh place when
the item amount is displayed at scale entry.)
• Part number: PR-45M II (PR-45M compatible)
• NO. of stations: 2 (Receipt and journal)
• Validation: No
• Printing system: Line thermal
• No. of dots: Receipt 288 dots
• Journal 288 dots
• Dot pitch: Horizontal 0.125mm
Vertical 0.125mm
• Font: font A: 12 dots x 24 dots
font B: 9 dots x 24dots
• Printing capacity: Receipt max. 24 characters
Journal max. 24 characters
• Character size: 1.5mm (W) x 3.0mm (H) at 12 x 24 dots
1.125mm (W) x 3.0mm (H) at 9 x 24 dots
• Print pitch: Column distance 1.5mm at 12 dots
1.125mm at 9 dots
Row distance 3.75mm
• Print speed: Approximate 50mm/s
• Paper feed speed:
(Manual feed)
Approximate 40mm/s
• Reliability: Mechanism MCBF 5 million lines
• Paper end sensor: Optional (Receipt and journal)
• Cutter: Manual
• Near end sensor: No
Note :
The PR-45MII has a minor change over the model of the PR-45M.
This printer does not include the gear cover (GCOVH7146BHZZ)
which is for the PR-45M only.
• Paper roll dimension: 44.5 m 0.5mm in width
Max. 83mm in diameter
• Paper quality: (Journal/Receipt)
High-quality paper
paper thickness: 0.06 to 0.08mm