Operation Manual

168

■

EURO change

You can program optional functions for EURO change. For the details, refer to EURO Migration Function

section.

Procedure

Program each item as follows:

• DATE (Use the numeric entry)

Preset the date to execute the automatic EURO modiﬁ cation

operation.

Enter the day (2 digits), month (2 digits), and year (2 digits) in

this sequence.

• TIME (Use the numeric entry)

Preset the time of the date to execute the automatic EURO modiﬁ cation operation.

Enter the hour (00-23)

• PRICE CONVERT (Use the selective entry)

YES: Converts the preset unit prices of Dept./PLU/EAN in the automatic EURO modiﬁ cation operation.

NO: Does not convert the preset unit prices of Dept./PLU/EAN to the ones of EURO currency in the

automatic EURO modiﬁ cation operation.

NOTE

The preset rate of the Exchange 1 is applied as the conversion rate, and the calculation method

is set to “division”.

• EURO JOB (Use the selective entry)

NON-COMPUL.: Non-compulsory the automatic EURO modiﬁ cation operation in the X2/Z2 mode after

the preset date.

COMPULSORY: Compulsory the automatic EURO modiﬁ cation operation in the X2/Z2 mode after the

preset date.

NOTE

When the EURO STATUS of your register is already “D” (i.e. the domestic currency has been

changed to EURO in your register), this programming is disabled.