Operation Manual, User's Manual

1-4
BEFORE USING THE MACHINE►BEFORE USING THE MACHINE
(12) Finisher*
This staples paper. A punch module can also be installed
to punch holes in output paper.
► FINISHER (page 1-135)
(13) Saddle stitch finisher*
This staples and folds paper. A punch module can also
be installed to punch holes in output paper. You can also
perform stapling manually.
► SADDLE STITCH FINISHER (page 1-144)
(14) Status indicator*
The status of the machine is indicated.
► STATUS INDICATORS (page 1-166)
(15) Right tray*
As required, paper can be output into the right tray.
Outputting received fax printouts into the right tray allows
you to separate them from other printed paper.
(16) Bypass tray
Use this tray to feed paper manually.
When loading paper larger than A4R or 8-1/2" × 11"R,
pull out the extension guide.
► LOADING PAPER INTO THE BYPASS TRAY (page
1-112)
(17) Punch module*
This punches and outputs paper.
(18) Tray 5 (MX-LC12)*
Store paper in this tray. Up to 3500 sheets can be stored.
(19) Tray 5 (MX-LCX3 N)*
Store paper in this tray. Up to 3000 sheets can be stored.
*Optional
(18)(17) (19)
(12) (13)
(15) (16)
(14)