Operation Manual, User's Manual

2-41
COPIER►BASIC PROCEDURE FOR MAKING COPIES
Staple ON (excluding booklet)
1
Tap the [Staple / Punch] key.
► COPY MODE (page 2-3)
Tap the [Original] key and specify the orientation of the original to have the orientation be correctly recognized.
► Specifying the orientation of the original (page
2-32)
2
Select the number of staples and
staple position.
• After the settings are completed, tap .
• A binding position cannot be selected for stapleless
stapling.
In normal mode
• Tap the [Output] key, and tap the [Staple] tab.
• If you need to change the output tray, select the output destination before selecting stapling.
• If the number of scanned originals exceeds the staple sheet limit, a message is displayed. Tap [Continue] or [Cancel].
[Continue]: Continues sorting without stapling.
[Cancel]: Cancels the staple sort setting.
B/W
Start
Colour
Start
CA
Preview
Copies
Staple / Punch
Staple
Off
Off
Position
Punch
4
3
A4
Preview
Start
Output
Others
No. of copies
Put Multiple Pages in A Page
Margin Shift
Shift Position to Have Margin
N-Up
Erase Shadow Around
Erase
Change Size/Direction.
Original
Colour
Start
1
Saddle
Stitch
Original
Right
To p
Left
Output Tray
Staple
Upper Tray
2 Staples
Sort/Group Punch Fold
Separator
Page
1 Staple
Off
Middle
Tray
Lower Tray
2-Sided Copy
CA
B/W
Trimmer
Setting
Offset
A3
B4
Proof Copy