Operation Manual, User's Manual

1-121
BEFORE USING THE MACHINE►PERIPHERAL DEVICES
PERIPHERAL DEVICES
Peripheral devices can be installed on the machine to increase its range of functionality.
The peripheral devices are generally optional. However, some models include certain peripheral devices as standard
equipment.
(As of November, 2019)
PERIPHERAL DEVICES
Product name Product
number
Description
Stand/550 sheet paper drawer MX-DE25 N TRAY 1 - 4 (when a low stand/550 sheet paper drawer or
stand/550/2x550/3x550/ 550&2100 sheet paper drawer is
installed) (page 1-98)
Low stand/550 sheet paper drawer MX-DE29 N
Stand/2x550 sheet paper drawer MX-DE26 N
Stand/3x550 sheet paper drawer MX-DE27 N
Stand/550&2100 sheet paper drawer MX-DE28 N TRAY 3 - 4 (when a stand/550&2100 sheet paper drawer is
installed) (page 1-101)
Large capacity tray MX-LC17 N LOADING PAPER IN THE LARGE-CAPACITY TRAY (when a
large capacity tray is installed) (page 1-103)
Long paper feeding tray MX-LT10 HOW TO PLACE THE LONG PAPER GUIDE (page 1-110)
Exit tray unit MX-TR19 N When a finisher is installed, this can be added to the right side of
the machine.
Exit tray cabinet*
1
MX-TU16 This enables separation of output locations by mode (copy,
printer, etc.).
Job separator tray MX-TR20 N
Inner finisher MX-FN27 N INNER FINISHER (page 1-123)
Finisher MX-FN28 FINISHER (page 1-127)
Finisher (large stacker) MX-FN30 FINISHER (LARGE STACKER) (page 1-130)
Saddle stitch finisher MX-FN29 SADDLE STITCH FINISHER (page 1-134)
Saddle stitch finisher (large stacker) MX-FN31 SADDLE STITCH FINISHER (LARGE STACKER) (page 1-138)
Paper pass unit MX-RB25 N This unit is required to install a finisher or a saddle stitch finisher.
Punch module MX-PN14A
MX-PN14B
MX-PN14C
MX-PN14D
This unit punches holes in copies and other output. An inner
finisher (MX-FN27 N) is required.
MX-PN15A
MX-PN15B
MX-PN15C
MX-PN15D
This unit punches holes in copies and other output. A finisher or
saddle stitch finisher (MX-FN28/MX-FN29) is required.
MX-PN16A
MX-PN16B
MX-PN16C
MX-PN16D
This unit punches holes in copies and other output. A finisher
(large stacker) or saddle stitch finisher (large stacker)
(MX-FN30/MX-FN31) is required.
PS3 expansion kit*
1
MX-PK13 Enables the machine to be used as a Postscript printer.