Operation Manual, User's Manual

1-106
BEFORE USING THE MACHINE►LOADING PAPER
Inserting transparency film
Loading envelopes
When inserting envelopes in the bypass tray, place them aligned to the left side in the orientation shown below.
Only the front side of envelopes can be printed or copied on. Place the front side facing down.
Fold the flap and make a sharp crease at the fold.
When placing DL
• Open the flap of the envelope.
• Place so that the flap is on the right.
When placing C4, C5, or C6
• Close the flap of the envelope.
• Place so that the flap is on the back side.
• Use SHARP-recommended transparency film.
• When loading multiple sheets of transparency film into the bypass tray, fan the sheets several times before loading.
• When printing on transparency film, remove each sheet as it is printed and output from the machine. If multiple sheets of
film are allowed to stack on the output tray, the sheets may stick together or become curled.
Oriented
horizontally
Oriented
vertically
Place the front side facing down.
When printing the front side
Address printing
Place the front side facing down.
Flap
When printing the front side