DX-B350P/B450P Operation-Manual GB
Table Of Contents
- Chapter 1: Introduction
- Chapter 2: Getting to Know Your Printer
- Chapter 3: Operator Panel
- Chapter 4: Windows Operations
- Chapter 5: Macintosh Operations
- Chapter 6: Embedded Web Server
- Chapter 7: Networking
- Chapter 8: Accessories
- Chapter 9: Troubleshooting
- Chapter 10: Clearing Paper Jams
- Chapter 11: Windows Utilities
8-4 User’s Guide
Tray module (A4/Letter, 550 sheets)
Accessories
2. Lift up the tray module to be installed at the top level by holding the parts as shown in the
diagram.
3. Align the front and back corners of the top and bottom tray modules, and slowly lower the
top module so that the guide pins at the 4 corners of the bottom module fit into the holes at
the base plate of the top module.
NOTE: The tray module must be lowered gently. Otherwise, the interior parts may be damaged.
4. Insert the fasteners provided into the 2 locations inside of the tray module and 2 locations
at the back of the tray module. Insert the fasteners securely.