Owner's Manual

2-51

COPIER

Contents

ADDING INSERTS WHEN COPYING ON

TRANSPARENCY FILM

(Transparency Inserts)

When copying on transparency film, the sheets may stick together due to static electricity. The transparency inserts

function can be used to automatically insert a sheet of paper between each sheet of transparency film, making the

sheets easy to handle.

It is also possible to copy on the inserts.

Place the transparency film in the

bypass tray.

• Transparency film can only be placed in the bypass tray.

• Place the transparency film face down on the bypass tray.

When placing transparency film, place so that the rounded

corner of the film is to the front and left.

• After loading the transparency film, configure the bypass tray

settings as explained in "MAKING COPIES USING THE

BYPASS TRAY" (page 2-37).

Place the original.

Place the original face up in the document feeder tray, or face down on the document glass.

After placing the original, specify the original size.

☞ ORIGINAL SIZES (page 2-29)

Select the special modes.

(1) Touch the [Special Modes] key.

(2) Touch the [Transparency Inserts] key.

☞ Special modes menu (1st screen) (page 2-40)

Inserts