Specifications
7
LCD DISPLAY SYSTEM SETTINGS
NOTE: By way of explanation the following refers to a set of sample buttons that may be obtained as an option. In addition
to power on/off and connection for backlight brightness the controller provides an On Screen Display of certain functions
which are controlled by 5 momentary type buttons (analog VR type) or 8 momentary type buttons (digital type):
Controls Analog VR type Digital type
On/Off – turns controller board power on VR toggle switch On/Off button
Brightness – controls backlight brightness Rotary VR Brightness +/- buttons
Menu
– Turns OSD menu On or Off (it will auto time
off)
–
Back to previous OSD menu page
Menu button Menu button
Select down
– Moves the selector to the next function (down)
SEL DN SEL DN
Select up
– Moves the selector to the previous function
(up)
SEL UP SEL UP
+
– Increase the OSD parameter values
– Go into the sub-menu page from the top
–
Confirm to select the OSD function
+ +
-
– Decrease the OSD parameter values
- Go into the sub-menu page from the bottom
- -
Reset to Factory Defaults Press and hold SEL DN button,
then power on the controller
Press and hold SEL DN button,
then power on the controller
ON/Off/Brightness
SEL UP
SEL DN
+
-
Menu
Analog VR type
Digital type
12V / 24VDC power input :
Analog 10K VR Type OSD
switch mount uses
P/N 410680550-3 or up
12V / 24VDC power input :
Digital 10K Type OSD
switch mount uses
P/N 416100520-3 or up
12VDC power input :
Digital 10K Type OSD
switch mount uses
P/N 416100510-3