User Manual

90 EN
This unit will record and playback Hi-Fi stereo sound. In addition, it
has an AV2 and NICAM stereo sound decoder.
This unit will receive stereo and bilingual broadcasts and it is possible
to record in several ways and to play back the sound.
Selecting the Sound Mode
You can select each mode by pressing [AUDIO] on the remote
control. Each mode is indicated on the TV screen as following.
• During playback of the recorded tape in Hi-Fi mode
• During reception of stereo broadcasts
Mode Audio output
Display on the
TV screen
Stereo Stereo STEREO
L L audio from both speakers LEFT
R R audio from both speakers RIGHT
Normal Monaural -None-
• During reception of bilingual broadcasts
Mode Audio output
Display on the
TV screen
Main Main audio from both speakers Main
Sub Sub audio from both speakers Sub
Main / Sub
• Main audio from the left speaker
• Sub audio from the right speaker
Main / Sub
Note
• If you play back non-Hi-Fi
tapes, the unit will play back
automatically in monaural
even if you select any mode.
• If the stereo signal becomes
weak, the broadcast is
automatically recorded in
monaural.
Hi-Fi Stereo Sound System
VCR functions
VCR/DVD COMBINATION
NA527AD
123
6
54
7
0
+10
89
STOP
PLAY
VCR
DVD
Press first.
To cue or review picture during playback (Picture Search):
Press [FWD D / q] or [REV E / r] during playback.
Press it again and the unit will search in super high speed.
To freeze the picture on TV screen during playback (Still mode):
Press [PAUSE F]. Each time you press the button, the picture will be
forwarded frame by frame.
If the picture begins to vibrate vertically during the still mode,
stabilize the picture by pressing the [PROG.
/ ].
If the picture is distorted or rolling vertically, adjust the vertical hold
control on your TV, if equipped.
Counter Reset:
Press [CLEAR/C-RESET].
To play back in slow motion:
Press [SLOW
] during playback or the still mode.
If the noise bars appear on the TV screen, you can reduce it by
pressing [PROG. / ].
Note
• Still / Slow / Pause mode will
be automatically cancelled
after 5 minutes to prevent
damage to the tape and the
video head.
• To return to play back from
the Picture Search / Still / Slow
mode, press [PLAY B].
Other operations
Different countries use different television colour systems.
This unit will distinguish the video colour system (MESECAM or PAL)
automatically according to the format of a prerecorded video tape
during playback or the input signal from the tuner or external devices.
To change the video colour system manually, press [SYSTEM].
Each time you press [SYSTEM], the TV screen will change as follows.
Changing the video colour system
Note
• If the playback picture on the
TV screen is black and white,
change the video colour
system manually.
• When you change the video
colour system manually,
be sure to change it before
recording. If you select the
wrong video colour system for
recording, the colour of the
picture may be deteriorated.
AUTO MESECAM PAL