Technical data

14 • The WAGO-I/O-SYSTEM 750
Manufacturing Number
WAGO-I/O-SYSTEM 750
PROFIBUS
2.3 Manufacturing Number
The manufacturing number is part of the lateral marking on the component.
Fig. 2-3: Manufacturing Number g01xx09e
The manufacturing number consists of the production week and year, the
software version (if available), the hardware version of the component, the
firmware loader (if available) and further internal information for
WAGO Kontakttechnik GmbH.
The number is also printed on the cover of the configuration interface.
2.4 Storage, Assembly and Transport
Wherever possible, the components are to be stored in their original
packaging. Likewise, the original packaging provides optimal protection
during transport.
When assembling or repacking the components, the contacts must not be
soiled or damaged. The components must be stored and transported in
appropriate containers/packaging. Thereby, the ESD information is to be
regarded.
Statically shielded transport bags with metal coatings are to be used for the
transport of open components for which soiling with amine, amide and
silicone has been ruled out, e.g. 3M 1900E.