LASER PRINTER (Multi-function printer) Operation Manual

5-19

SADDLE STITCH FINISHER

■ Staple sort mode

Collated sets of printouts are stapled and delivered to the offset tray. Alternatively, printed paper is stapled at the

center and delivered to the lower tray. The relation among stapling positions, orientation, paper size for stapling,

and stapling capacity is shown below.

Stapling positions

Rear corner of

printouts

Center left two

positions of

printouts

Front corner of

printouts

Portrait orientation

Landscape orientation

Available paper sizes: 8-1/2"

x 11", A4 and B5

Stapling capacity: Up to 50

sheets for any sizes

Same as above

Available paper sizes: 11" x 17",

8-1/2" x 14", 8-1/2" x 13", 8-1/2"

x 11", A3, B4, A4, A4R, and B5

Stapling capacity: Up to 50

sheets for 8-1/2" x 11", A4 and

B5, and up to 25 sheets for

other sizes

Same as above

Saddle stitch N/A

Available paper sizes: 11" x

17", 8-1/2" x 11"R, A3, B4,

and A4R

Stapling capacity: Up to xx

sheets for any sizes

■ Punch function (only if a punch module

is installed)

If the saddle stitch finisher is equipped with a punch

module as a peripheral unit, printed paper can be

punched (two holes) and delivered to the offset tray.

The saddle stitch function and the punch function

cannot be used together.

{Original 1} {Punch positions}

{Original 2} {Punch positions}

■ Saddle stitch function

Printed paper is stapled at two positions at the center and is folded in two with the center down before delivery.