Unit installation

Main
code
Sub
code
Contents Details of operation
Initial
value
Set range
41 3 Document sensor light
reception level display
<Other than AR-162>
Used to display the light reception level and the detection level of the
document sensor. (The sensor level adjusted with SIM 41-2 is displayed.)
42 1 Developing counter clear Used to clear the Developing counter. !2
43 1 Fusing temperature setting Used to display the current setting of the fusing temperature at right.
After selecting the fusing temperature with the magnification ratio display
key, press the start key, and the set value is stored. The set range is
155 " 190˚C. Use the magnification ratio key to adjust the value by –5˚C.
170 155 " 190
46 1 Copy density level
adjustment
After completion of warmup, shading is performed and the currently set
copy density level is displayed. For the adjustment procedure, refer to
the previous descriptions.
48 1 " 99
19 AE mode picture quality
change
The currently set AE picture quality mode (gamma table) is displayed
with the following set values. Enter a set value and press the START
key, then the set value will be inputted.
1 1 " 2
48 1 Main scanning (front/rear)
direction magnification
ratio adjustment
(Copy/FAX/OC-SPF
common)
After completion of warmup, shading is performed and the currently set
main scanning (front/rear) direction magnification ratio adjustment and
the OC mode document center off adjustment are performed. For the
adjustment procedure, refer to the previous descriptions.
58 1 " 99
2 OC mode sub scanning
direction magnification
ratio adjustment in
copying
After completion of warmup, shading is performed and the currently set
OC mode sub scanning direction magnification ratio adjustment in
copying is performed. For the adjustment procedure, refer to the
previous descriptions.
50 1 " 99
!2: Display after clearing each counter
000 (0.75 sec) # Blank (0.35 sec) # 000 (0.75 sec) # Blank (1.0 sec) # Repetition
Key operation Display
Light reception/Detection
level select: Magnification
ratio display key
Display at the 3rd digit
“A”: Light reception level display
“b”: Document detection level display
Sensor select: Auto
magnification ratio select key
Sensor A: A3 (11 $ 17) document
size LED
Sensor B: A4 (8 1/2 $ 14) document
size LED
Sensor C: A4R (8 1/2 $ 11)
document size LED
Sensor D: B4 (8 1/2 $ 5 1/2)
document size LED
Key operation
Fusing temperature select: Magnification ratio display key
Key operation Display
Mode select:
Exposure mode select
key
Copy density level:
Copy quantity keys
<LED lighting at each mode selection>
Auto mode: AUTO LED
Manual mode: MANUAL LED
Photo mode: PHOTO LED
Toner save mode: MANUAL + PHOTO LED
AETS mode: AUTO + PHOTO LED
Key operation/Display
1: Picture quality priority mode
2: Toner consumption priority mode
Key operation Display
Adjustment mode
select: Magnification
ratio display key
Auto magnification ratio adjustment:
AUTO LED
Manual main scanning
direction magnification
ratio adjustment
Set value: Copy
quantity keys
Manual magnification ratio adjustment:
MANUAL LED
OC mode document center off adjustment:
PHOTO LED
Key operation
OC mode sub scanning direction magnification ratio in copying:
Copy quantity keys
AR-162 SIMULATIONS – 10