All in One Printer User's Manual

Scanning with the "Scanner and Camera Wizard" in Windows XP

Windows XP includes as a standard feature an image scanning function. The

procedure for scanning with the "Scanner and Camera Wizard" is explained here.

Place the original you wish to scan on the original table/RSPF/

SPF.

For the procedure for placing the original, see "ORIGINAL PLACEMENT"

(p.14).

Click the "start" button , select

"Control Panel", and click "Printers

and Other Hardware", and then click

"Scanners and Cameras" in the start

menu. Click the "SHARP AR-xxxx"

(where xxxx is the model name of

your unit) icon and click "Get

picture" in "Imaging Tasks".

The "Scanner and Camera Wizard"

appears. Click "Next" and establish the

basic settings for scanning.

For information on the settings, see the

Windows XP help file. After completing each

setting, click "Next".

Select a name, format, and folder for the

scanned image.

For information on the image name, file format,

and folder, see the Windows XP help file.

Scanning begins. When scanning ends,

select the next task you wish to perform.

For information on each selection, see the

Windows XP help file. To quit the "Scanner and

Camera Wizard", select "Nothing. I’m finished

working with these pictures." and click "Next".

Click "Finish" in the screen that appears.

The "Scanner and Camera Wizard" closes and the scanned image is saved.

To cancel scanning, click the "Cancel" button in the screen that is

displayed.