Operation Manual, User's Manual

10-178
SETTING MODE►SYSTEM SETTINGS
Prohibit Reuse of Deleted User’s Account Name
Prohibits the reregistration of user accounts (login names) once they have been deleted. This setting can be used to
prohibit reregistration for a certain period of time or for no period of time.
After enabling the setting, set the period of time to prohibit reregistration. If you select "Undefined", you can prohibit
reregistration without setting a period.
If [Case sensitivity of login name is enabled.] is enabled in the authentication settings, it will be judged case sensitive. If
it is disabled, it will be judged without distinguishing case.
Example: Deleted login name: ABC, login name to be registered: Abc
If [Case sensitivity of login name is enabled.] is enabled in the authentication settings, the login name Abc can be
registered because bc is in lower case. If it is disabled, Abc cannot be registered.
Factory default settings: Disable, Period:365
Password Change
Restrict Device Web Page Access Via Password
Use this setting to display the login screen and require login in order to access the Web server.
Change Password
The administrator password can be changed.
When you change the password, be sure to remember the new password.
(It is recommended that you periodically change the administrator password.)
• Enter a password consisting of 5 to 255 characters, and tap the [Store] key. Your setting is made valid only when the
machine is turned On again.
The user-level authentication password is required to add, edit or delete the destination. When you log on, enter
"users" as the user name. Then, enter the user password that you have registered with this option.
The administrator-level authentication password is required to select all settings and the same functions as those
available with the user-level password. When you log on, enter "admin" as the user name. Then, enter the
administrator password that you have registered with this option.
• If you tap the [Store] key without entering a password, the previously set value is assumed. Password protection is
enabled by default.
• The login names of user accounts that have been deleted since the time this setting was enabled are recorded in the list,
up to a maximum of 2000. When the number of user accounts exceeds 2000, the login names of the oldest user accounts
will be deleted.
• When this setting is enabled and then disabled, the login name record of the deleted user account will be erased.
• The login names of user accounts that are deleted when this setting is disabled will not be recorded.
• The day of deletion is the first day, and the login names of user accounts that have exceeded the set period will be
removed from the list.
• The login names of user accounts deleted by [Delete All Users] in the user list will not be recorded in the list and will not be
subject to this setting.
In the factory default state, the user password must be entered.
(For the default administrator password, see Start Guide.)