Operation Manual, User's Manual

10-84
SETTING MODE►SYSTEM SETTINGS
Condition Settings
Default Reply.Address Set
The information stored here is used if you do not specify [Reply to] in the send settings when performing Scan to E-mail.
Factory default settings: Disable
Bcc Setting
Enable Bcc
Enable this setting if you wish to use Bcc delivery. Displays the [Bcc] key on the image send address book screen.
Factory default settings: Disable
Display Bcc Address on the Job Status Screen
Displays Bcc addresses on the job status screen and address list tab.
Factory default settings: Disable
Quick On Line Sending
When this setting is enabled, the machine starts transmitting a fax as soon as the first page is scanned.
Transmission takes place at the same time as the remaining pages are being scanned.
PDF Compression Options
Flate Compression
When sending a PDF file, you can compress the file by Flate Compression to reduce the file size.
Factory default settings: Enable
Highly compressed PDF resolution settings
Set the resolution when saving as a highly compressed PDF.
Factory default settings: 300x300dpi
Compression Mode at Broadcasting
Selects the compression mode for broadcasting using Scan to E-mail or Internet fax. The compression mode set here is
used for all destinations regardless of their individual compression mode settings.
Black & White
MH (G3), MMR (G4)
Colour/Greyscale
Low, Medium, High
Reduce Colours
Reduce the file size by limiting the number of colours and shades used.
Factory default settings: B/W:MH(G3), Colour/Greyscale:Middle, Reduce Colours:Disable
Send Destination Link Settings
Enable this to send only the URL of scanned data to the destination.
Factory default settings: Disable
Enable Send Destination Link as Default
Enable this to always send only the URL of scanned data to the destination. When this function is enabled and you are
in simple mode, only the URL is sent to the e-mail address. When normal mode is used, the [Send Destination Link]
checkbox is always in the action panel that appears in the home screen of Scan to E-mail.
Factory default settings: Disable