Operation Manual, User's Manual

10-40
SETTING MODE►DOCUMENT OPERATIONS
Submit Print Job
In addition to a file on your PC, this procedure can be used to print any file that can be accessed from your PC, such as
a file on another PC connected to the same network.
Files that can be printed are PDF, TIFF, JPEG, PCL, PS, XPS, DOCX, PPTX, and XLSX files with extensions pdf, tif, tiff,
jpeg, jpg, jpe, jfif, pcl, ps, xps, docx, pptx, and xlsx. Available only if the MFP supports PostScript.
Enter the password for the encrypted PDF data on Spool Queue of the Job Status screen.
For the procedure for accessing "Setting Mode (Web version)", refer to "SETTING MODE".
Print Settings
Select print settings. Select the file you want to print in "Select File", select settings, and then click [Print].
Item Description
Copies Set the number of copies to be printed.
Paper Size Set the print size.
Orientation Select portrait or landscape for the print orientation.
Factory default settings: Portrait
Duplex printing Select one-sided printing, two-sided printing (booklet), or two-sided printing (tablet).
Factory default settings:1-Sided
Output If printing by set, select the "Print per Unit" checkbox.
Factory default settings: Print per Unit: Enabled
Staple It can be used by connecting a finisher, or saddle stitch finisher. The settings differ
depending on the connected finisher, and saddle stitch finisher.
Factory default settings: Off
Separator Page Select to insert separator pages. Specify whether separator pages are to be added in front
of or behind each set. Select the paper tray with the paper you want to use from the paper
trays.
Factory default settings: Insert Top of Sets: Disabled, Insert End of Sets: Disabled
Punch It can be used when the punch unit is attached to the finisher.
Fold It can be used when the saddle stitch finisher is attached. Set the orientation of the paper
fold.
Saddle Fold It can be used when the saddle stitch finisher is attached. Set the orientation of the paper
fold in "Print side". If you want to fold the printed paper together in the saddle, set "Fold
multiple sheets together".
Z-Fold Paper Size It can be used when the paper folding unit is attached. Select the paper size to use for
Z-fold.
C-Fold It can be used when the paper folding unit is attached. Set the fold orientation in "Print
side". In "Opening direction", select the opening orientation when unfolding the folded
paper.
Accordion Fold It can be used when the paper folding unit is attached. In "Opening direction", select the
opening orientation when unfolding the folded paper.
Half Fold It can be used when the paper folding unit is attached. Set the orientation of the paper fold
in "Print side".
Double Fold It can be used when the paper folding unit is attached. Set the fold orientation in "Print
side". In "Opening direction", select the opening orientation when unfolding the folded
paper.
Fit To Page Print with the file expanded to the full paper size.