Operation Manual, User's Manual

9-5
CONVENIENT USE OF THE MACHINE►USE ENVIRONMENTALLY FRIENDLY
Transition to Energy Saving and Auto Power Shut-Off modes
* Factory default setting
Automatic
This function controls the power optimally for each time period by analyzing the use of machine based on job logs
obtained during a certain time period.
Manual
You can set a pattern for each time band.
The machine already has the 3-pattern template. The Energy Save pattern can be added to the "Original Eco Patterns 1
to 4".
Three-pattern template
Sleep Mode Power Level
Low Power: The machine switches to the power saving mode, but it takes some time to recover.
Fast Wake Up: Compared with Low Power, the power value rises by a certain degree, but it results in faster
recovery.
Motion Sensor Mode : The motion sensor enables the machine to automatically wake from sleep mode.
Pattern Transition time Average outputs per
hour*
Mode1 (Job Start
Priority1)
After 1 hour 1000 or more
Mode2 (Job Start
Priority2)
After 30 minutes 250 to 999
Mode3 (Energy Saving
Priority1)
After 5 minutes 60 to 249
Mode4 (Energy Saving
Priority2)
After the minimum time period Up to 59
If the machine does not have the 4-week job log information, the machine enters the template2 (Mode3 (Energy Saving
Priority1) between 8:00 and 18:00 hours). Then after that, it enters Mode4 (Energy Saving Priority2).
Template Pattern Description of mode
Template 1 All Day "Energy Save
Priority2"
The machine runs in the "Mode4 (Energy Saving Priority2)" all the
time.
Template 2 8:00-18:00 "Energy Save
Priority1"
The machine runs in "Mode3 (Energy Saving Priority1)" between 8:00
and 18:00, and in "Mode4 (Energy Saving Priority2)" at other times.
Template 3 8:00-18:00 "Job Start
Priority1"
The machine runs in "Mode1 (Job Start Priority1)" between 8:00 and
18:00, and in "Mode4 (Energy Saving Priority2)" at other times.