Operation Manual, User's Manual

9-2
CONVENIENT USE OF THE MACHINE►USE ENVIRONMENTALLY FRIENDLY
ECO
ECO FUNCTIONS OF THE MACHINE
Mode Settings
The eco function settings are set in a batch. "Custom Mode" and "Eco Mode" are available.
Setting values applied by each mode is as follows.
Each Energy Save settings in System Settings is not applied when Custom/Eco mode is used.
AUTO POWER SHUT-OFF MODE
This mode turns off the power to the operation panel and the fusing unit, and makes the machine wait in the lowest
power consumption state.
Auto Power Shut-Off mode will activate when the set duration of time elapses in waiting status without executing a job.
Compared to preheat mode, the power-saving rate is considerably higher but the wakeup time is longer.
The main power indicator blinks in yellow when the machine is in Auto Power Shut-Off mode.
This mode is cleared when print data is being received, fax data is being output, or when the [Power] button is pressed
while it is blinking.
USE ENVIRONMENTALLY FRIENDLY
Function Custom Mode Eco Mode
Preheat Mode Setting 15min. (for Europe), 1min. (Except for
Europe)
1min.
Turn off Panel Display during pre-heat
mode
On On
Auto Power Shut-Off Timer Fix transition time.:
45min. (for Europe), 15min. (Except for
Europe)
Fix transition time.:
1min.
As soon as the remote job is finished,
enter Auto power shut off mode.
On On
Sleep Mode Power Level Low Power Low Power
Eco Scan On On (All Modes Except Copy)
Main power indicator
[Power] button