Operation Manual, User's Manual

5-47
FACSIMILE►BASIC TRANSMISSION METHODS
SPECIFYING THE ORIGINAL SCAN SIZE USING NUMERIC VALUES
When scanning a non-standard size original such as a postcard, specify the original size by numeric values after placing the original.
The width can be from 25 mm to 432 mm (1" to 17"), and the height can be from 25 mm to 297 mm (1" to 11-5/8").
In Easy mode
When the scan size is specified by numeric values, the send size cannot be specified.
1
Tap the [Original] key.
2
Tap the [Auto] key.
3
Tap the [Direct Entry] key.
4
Specify the original size.
• Tap the areas displaying width and height sizes respectively, and enter the sizes using the numeric keys.
• It is convenient to use ( ) to finely adjust the entered size.
5
Tap twice.
On the base screen, check that the specified size is displayed on the [Original] key.
To cancel the specified size settings:
Tap the [Auto] key.
Original
Size
OK
Auto
Image
Orientation
Duplex Setup
1-Sided Book Tablet
Original size
OK
Auto
Direct Entry
A6R
B4
A3
216x340 216x343
A5 B5R
A5R A4
B5 A4R
Long Size
Custom Size
OK
297
Y
X
(25 ~ 432)
mm
(25 ~ 297)
mm
420
Direct Entry