Operation Manual, User's Manual

5-36
FACSIMILE►BASIC TRANSMISSION METHODS
4
Specify the destination fax number.
• ENTERING A DESTINATION NUMBER USING THE NUMERIC KEYS (page 5-11)
• RETRIEVING A DESTINATION FROM AN ADDRESS BOOK (page 5-12)
• USING A SEARCH NUMBER TO RETRIEVE A DESTINATION (page 5-15)
• USING A TRANSMISSION LOG TO RESEND (page 5-20)
• Only one destination can be specified. A one-touch key in which multiple destinations are stored cannot be used.
• The destination cannot be retrieved from a global address book.
5
Tap the [Start] key to begin transmission.
When the line has been connected to the destination, scanning of the original starts.
If a fax transmission is already in progress when the direct transmission operation is performed, the direct transmission
will wait until the previous transmission is finished. When the previous transmission is completed, the direct transmission
will begin.
While the direct transmission is waiting, you can only check the job status.
JOB STATUS (page 2-53)
To cancel scanning the original:
Tap the [Cancel Scan] key.