Operation Manual, User's Manual

11-33
TROUBLESHOOTING►GENERAL PROBLEMS
TEXT AND LINES ARE FAINT AND DIFFICULT TO SEE
Check Solution
Is the overall print density too light? ■ Use the setting below to change the overall print density.
Select "Settings (Web version)" - [System Settings] → [Image Quality
Adjustment] → [Print Image Quality] → [Quick Image Quality Adjustment]. Set
default setting [2] to [3 (Sharp)] to increase the overall density, or [1 (Smooth)] to
decrease the overall density.
Are there fine lines in the original
data?
■ Change the width of specific printed lines.
Select "Settings (administrator)" - [System Settings] → [Image Quality
Adjustment] → [Print Image Quality] → [Line Thickness]. Increase the value of
default setting [5] to make the lines thicker, or decrease the value to make the
lines thinner. (Text and raster data such as bitmap images cannot be changed.)
!