Operation Manual, Quick Start Guide

Table Of Contents

PRINTER

PRINTING ON ENVELOPES

The bypass tray or the tray 1 can be used for envelope printing.

(1) Click the [Paper Source] tab.

(2) Select the envelope size from "Output Size".

When "Output Size" is set to [DL], "Paper Type" is also automatically set to [Envelope].

(3) Select [Bypass Tray] or the [Tray 1] from the "Paper Tray".

Select print settings.

(1) Click the [Main] tab.

(2) Select the original size.

To select settings on other tabs, click the desired tab

and then select the settings.

(3) Click the [OK] button.

• Help can be displayed for a setting by clicking the

setting and pressing the [F1] key.

• Click the [Help] button, the Help window will open to

let you view explanations of the settings on the tab.

Click the [Print] button.

Printing begins.

• Set the paper type of the bypass tray or the tray 1 to [Envelope] and load an envelope into the bypass tray or the tray 1.

► Loading envelopes (page 15)

• When using media such as envelopes that can be loaded only in a specific orientation, you can rotate the image 180

degrees. For more information, see "User's Manual".

(3)

(2)

(1)

(2)

(3)