User Manual

Remove the remote control

cover.

Insert batteries in the compart-

ment, making sure the ± and

— polarities are correctly

aligned.

• The display indicates "AM

6:00" when batteries are prop-

erly installed.

Reinstall the cover.

USING THE REMOTE CONTROL

E-6

NOTES:

• The battery life is approximately one year in normal use.

• When you replace the batteries, always change both batteries, and make sure

they are the same type.

• If the remote control does not operate properly after replacing the batteries, take

out the batteries and reinstall them again after 30 seconds.

• If you will not be using the unit for a long time, remove the batteries from the

remote control.

Point the remote control towards

the unit’s signal receiver window

and press the desired button. The

unit generates a beep when it re-

ceives the signal.

• Make sure there is no curtain or other

object between the remote control and the

unit.

• The remote control can send signals from

up to 7 metres away.

LOADING BATTERIES Use two size-AAA (R03) batteries.

HOW TO USE THE REMOTE CONTROL

Remote control

cover