OPERATION MANUAL AR-NB3 Network Printer

38
7
SPECIFICATIONS
PRINTER SPECIFICATIONS
*1 Print speed during printing of the second sheet and following sheets when using 8-1/2" x 11" (A4) plain paper and performing
continuous one-sided printing of the same page; excluding use of offset output.
*2 300 dpi can only be selected when using the PCL6 or PCL5e printer driver.
*3 For information on machine and dual function board memory, see the "Operation manual (for general information and copier)".
*4 Available only if the PS3 expansion kit (AR-PK1/N) is installed.
Printing speed*
1
When the dual function board is installed:
AR-M206/AR-M207: 20 pages/min, AR-M161/AR-M162/AR-M165: 16 pages/min
When the dual function board is not installed:
12 pages/min
Resolution
600 dpi / 300 dpi*
2
Network expansion
kit memory*
3
Standard memory: 64 MB
Additional memory slot:1 slot (an additional 128 MB or 256 MB memory module
(144-pin SDRAM SODIMM) can be installed)
Emulation
PCL5e, PCL6, PS3 (PostScript 3)*
4
Installed fonts
PCL6/PCL5e compatible: 80 outline fonts and 1 bitmap font
PostScript 3 compatible*
3
: 136 outline fonts
Interface
10/100Base-TX network interface
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification
changes for product improvement without prior notice.
Note