Specification Sheet

AR 550U
M
AR 620U
M
AR 700U
M
specifications
Main Copier Specifications
Type: Console
Print System: System (laser)
Copy System: Dry electrostatic transfer system
Originals: Sheets, bound documents
Copy Size: Min. 5 1/2" x 8 1/2", Max. 11" x 17"
Exposure System: OPC
Developer System: Dry-type two-component magnetic brush development
Paper Feed System: 4 trays and bypass tray
Fusing System: Heat roller
Resolution: Scan: 600 x 600 dpi
Output: 600 x 600 dpi
Gradations: Scan: 256 levels
Printing: 2 levels
Originals: Sheets, bound documents
Copy Paper: Plain paper and special papers
Copy Sizes: Max. 11" x 17", min. 5 1/2" x 8 1/2"R, Postcard
Image loss: Max. 11/64" (leading edge and trailing edge in total), max.
11/64" (along all other edges in total)
Warm-Up Time: 120 seconds or less
First-Copy Time: 3.9 seconds or less (when A4 size paper is fed horizontally from tray 1)
Copy Ratio: Variable 25 to 400% in 1% increments
Fixed Presets: 25%, 64%, 77%, 100%, 121%, 129%, 200%, 400%
Continuous Copy: 999 copies
Hard Drive Capacity: 40 GB (stores approximately 60,000 pages)
Expansion DIMM Slot: 1 slot (64 MB, 128 MB or 256 MB can be installed)
Dimensions: 28 43/64" (W) x 26 47/64" (D) x 46 15/16" (H)
When bypass tray is extended: 49 47/64" (W) x 26 47/64" (D)
x 46 15/16" (H)
Weight: AR-M550U, AR-M550N, AR-M620U, AR-M620N: Approx. 408 lbs.
Overall Dimensions: 49 49/64" (W) x 26 47/64" (D)
Required Power Supply: AC 120V, 60Hz, 16A
Power Consumption: 1.8 KW
Optional Facsimile Expansion Kit Specifications (AR-FX8)
Applicable Telephone Line: Public switched telephone network
Compression Method: MH, MR, MMR, JBIG
Transmission Modes: Super G3, G3 (the machine can only send faxes to and receive faxes from
machines that support G3 or Super G3)
Scanning Method: CCD flatbed scanning
Scanning Resolution: (Supports ITU-T standards)
8 x 3.85 lines/mm (Standard)
8 x 7.7 lines/mm (Fine, Fine-Halftone)
8 x 15.4 lines/mm (Super Fine, Super Fine - Halftone)
16 x 15.4 lines/mm (Ultra Fine, Ultra Fine - Halftone)
Printing Method: Electrophotographic system (laser)
Transmission Speed: 33.6 kbps 2.4 kbps automatic fallback
Transmission Time:
1
2 seconds (Super G3 mode / 33.6 kbps, JBIG),
6 seconds (G3 ECM mode / 14.4 kbps, MMR)
Paper Sizes: 11" x 17" to 5 1/2" x 8 1/2"
Effective Print Width: 11.5" max. (11" x 17" printing)
Input Document Size: 11" x 17" to 5 1/2" x 8 1/2" (5 1/2" x 8 1/2": Vertically-oriented
feeding); Maximum length: 31 1/2" (using Automatic document feeder)
Effective Scanning Width: 11.7" maximum
Halftone Transmission: Yes (256 levels)
Contrast Adjustment: Automatic (5 levels by manual adjustment)
Extension Telephone: Connection Possible (1 telephone)
Auto-Dialing: Combined total of 999 one-touch and group keys, redialing (automatic)
Timer Transmission: Yes
Program Function: Yes (8 programs)
F-Code Support: Yes (can transmit and receive SUB/SEP (sub-address)
and SID/PWD (passcode) signals)
Automatic Document Yes (maximum of 150 sheets of 21 lbs. paper, or total stack thickness of
Feeding: 25/32" or less)
Image Memory: 2 MB
2
Error Correction Mode: (ECM) Yes
Optional Large Capacity Tray Specifications
Paper Size: 8 1/2" x 11" (the paper size can only be changed by a service technician)
Paper Weight: 16 to 28 lbs.
Paper Capacity: (plain) 3,500 sheets 20 lbs.
Dimensions: 14 23/32" (W) x 21 31/64" (D) x 20 3/8" (H)
Power Supply: Supplied from the main unit
Weight: Approximately 63 lbs.
Optional Punch Unit (AR-PN4B)
Hole Punching: 2 or 3 holes
Page Weight: 16 to 140 lb. index
Optional Two-Tray Finisher Specifications (AR-F15)
Number of Trays: 2
Paper Output: Face down output
Paper Capacity: Upper paper tray/Middle paper tray:
Non-stapling: 2,000 sheets of paper: 8 1/2" x 11", 5 1/2" x 8 1/2"R, 20 lbs.
1,000 sheets of paper: Sizes other than the above
Stapling: 100 sets or 750 pages of 8 1/2" x 11" paper;
100 sets or 500 pages of other sizes of paper
Paper Size: Upper paper tray/Middle paper tray: 11" x 17", 8 1/2" x 14", 8 1/2" x 13",
8 1/2" x 11", 8 1/2" x 11"R, 7 1/4" x 10 1/2"R, 5 1/2" x 8 1/2"R
Page Weight: Upper paper tray/Middle paper tray: 16 to 68 lbs.
Allowed Paper Sizes Upper paper tray/Middle paper tray: 11" x 17", 8 1/2" x 14",
for Stapling: 8 1/2" x 13", 8 1/2" x 11", 8 1/2" x 11"R
Maximum Number of Top left corner stapling: Portrait 50 sheets; Landscape 30 sheets
Sheets for Stapling: Lower left corner stapling: Portrait 50 sheets; Landscape 30 sheets
Center left stapling: Portrait 50 sheets; Landscape 30 sheets
Stapling Positions: 1 place at back, 1 place at front, one place at front (diagonal), 2 places
Dimensions: 32 1/64" (W) x 24 13/16" (D) x 45 9/32" (H)
Weight : Approx. 113 lbs.
Optional Saddle-Stitch Finisher Specifications (AR-F16)
Number of Trays: 3
Paper Output: Face down output
Paper Capacity: Upper paper tray/Middle paper tray:
Non-stapling: 2,000 sheets of paper: 8 1/2" x 11", 5 1/2" x 8 1/2"R 20 lbs.
1,000 sheets of paper: Sizes other than the above
Stapling: 100 sets or 750 pages of 8 1/2" x 11" paper
100 sets or 500 pages of other sizes of paper
Lower tray: Stapled print capacity is11–15 sheets x 10 sets,
6 –10 sheets x 20 sets, 1–10 sheets x 25 sets
Paper Size: Upper paper tray/Middle paper tray: 11" x 17", 8 1/2" x 14",
8 1/2" x 13", 8 1/2" x 11", 8 1/2" x 11"R, 7-1/4" x 10 1/2"R,
5 1/2" x 8 1/2"R
Lower tray: 11" x 17", 8 1/2" x 11"R
Allowed Paper Sizes Upper paper tray/Middle paper tray: 11" x 17", 8 1/2" x 14",
for Stapling: 8 1/2" x 13", 8 1/2" x 1", 8 1/2" x 11"R
Lower tray: 11" x 17", 8 1/2" x 11"R
Maximum Number of Top left corner stapling: Portrait 50 sheets; Landscape 30 sheets
Sheets for Stapling: Lower left corner stapling: Portrait 50 sheets; Landscape 30 sheets
Center left stapling: Portrait 50 sheets; Landscape 30 sheets
Saddle-stitch: Landscape only 15 sheets
Stapling Positions: 1 place at back, 1 place at front, one place at front (diagonal), 2 places
Dimensions: 32 1/64" (W) x 24 13/16" (D) x 45 9/32" (H)
Weight : Approx. 157 lbs.
As an ENERGY STAR
®
Partner, SHARP has
determined that this product meets the
E
NERGY STAR
®
guidelines for energy efficiency.
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, NJ 07430-1163
1-800-BE-SHARP
www.sharpusa.com
Design and specifications subject to change without notice.
Sharp is a registered trademark of Sharp Corporation.
All other trademarks and registered trademarks are property
of their respective holders.
1
Transmission speed is for an 8 1/2" x 11" document with approximately 700 characters at
standard resolution (8 x 3.85 lines/mm) sent in high speed mode (33.6 kbps (JBIG) or 14.4 kbps
(MMR). This is only the time required to transmit the image information; the time required to send
protocol signals is not included. Actual transmission times will vary depending on the contents of
the document, the receiving machine type, and telephone line conditions.
2
Image memory can be expanded by installing the optional Fax Expansion Memory (AR-MM9).