User Manual

36
INITIAL SETTINGS
SETTING RESOLUTION PRIORITY
For most faxing jobs, you will most likely want to specify the resolution. However, you can also set a default
resolution when no setting is made using the [RESOLUTION] key.
To turn on this function, follow the procedure below:
1
Press the [MENU] key.
2
Press the [ ] key ( ) or [ ] key ( )
until "4:USER PROGRAM" appears,
and then press the [OK] key.
3
Press the [ ] key ( ) or [ ] key ( )
until "3:RESO. PRIORITY" appears,
and then press the [OK] key.
4
Press the [ ] key ( ) or [ ] key ( )
to select the transmission resolution.
The selections are as
follows:
1:STANDARD
2:FINE
3:SUPER FINE
5
Press the [OK] key.
6
Press the [CLEAR ALL] key ( )
Press the [CLEAR ALL]
key ( ) to exit.
1,2,3,
1,2,3,
"4:USER PROGRAM"
Selection
"3:RESO. PRIORITY"
Selection
1,2,3,
1,2,3,
1,2,3,
1,2,3,