User Manual

JOB/FUNCTION CHECK
115
Job/Function Check
4
Checking the Status of Transmission
(Transmission Job Status)
You can check the job currently being transmitted.
In the case of broadcast transmission, the number of remaining destinations is displayed.
Transmissions in recall mode or which were prevented by a line error are not included in the number of
remaining destinations.
1
Press the JOB STATUS key.
2
Select "TX/RX JOBS" with the or key and then press the OK key.
3
The status of transmission is displayed.
●
The transmission job currently being executed is shown in the message display.
●
If transmission is not taking place, "NONE" appears.
●
When you are finished, press the CLEAR ALL key to exit.
Transmission job status display
The display varies depending on the type of transmission and status. The name of the operation appears
on line 3. On occasion this may differ from the actual function name.
Shows "DIALING", "COMM.", "SENDING", or "RECEIVING"
(When using an extension phone, shows "USING EXT. TEL.")
Shows the destination
Shows the operation
฀
฀
฀
฀
฀
Shows the number of destinations remaining (including the current
station) when the operation is a broadcast transmission.
When "SENDING" or "RECEIVING" appears, shows the number
of pages
฀
฀
฀
฀
฀
DQQMࡍ࡯ࠫ㧞㧜㧜㧝ᐕ㧣᦬㧝㧣ᣣޓἫᦐᣣޓඦᓟ㧢ᤨ㧡㧢ಽ