Specifications

AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-40
43 2 V.34 mode function
(when call in)
Used to set whether V.34 mode is enabled or not as a capacity of the own
machine when receiving (calling in).
0 Enable
3-6 V.34Symbol Rate Mask
(when receiving)
Used to set Symbol Rate in reception of V.34 mode.
When set to other than the below, it is set as the default (0101).
0 3429
1
0
1
7,8 Not used 0
0
44 1-4 V.34 mode transmission
speed
Used to set the communication speed (capacity) when transmitting in V.34
mode.
The set range is 2400bps - 33600bps in the increment of 2400bps by binary
input of N into "2400(bps) x N." When N is set to 0000, it is set to 2400bps.
When set to 1111, it is set to 33600bps. When, however, set to 2400bps, SW45-
1~6 must be disabled. When set to 33600bps, SW45-7 must be enabled "1".
1 33600bps
1
1
0
5-8 V.34 mode reception
speed
Used to set the communication speed (capacity) when receiving in V.34 mode.
The set range is 2400bps - 33600bps in the increment of 2400bps by binary
input of N into "2400(bps) x N." When N is set to 0000, it is set to 2400bps.
When set to 1111, it is set to 33600bps. When set to 2400bps, however, SW43-
3~6 must be set to 2400: "0000."
When set to 33600bps, SW43-3~6 must be set to 3429: "0101."
1 33600bps
1
1
0
45 1 2800 Symbol Rate Mask
in V.34 communication
Used to set Enable/Disable of 2800Hz as Symbol Rate of V.34.
When set to Disable, 2800Hz is not selected.
0 Enable
2 Not used 0
3 3000 Symbol Rate Low
Carrier setup in V.34
transmission
Used to set Enable/Disable of Low/High carrier when selecting 3000Hz as
Symbol Rate of V.34.When this is set to Disable, Low of 3000Hz is not selected.
It is valid only in transmission.
0 Enable
4 3000 Symbol Rate High
Carrier setup in V.34
transmission
Used to set Enable/Disable of Low/High carrier when selecting 3000Hz as
Symbol Rate of V.34. When this is set to Disable, High of 3000Hz is not
selected. It is valid only in transmission. When both of Low/High are set to
Disable, Symbol Rate=3000Hz is not selected.
0 Enable
5 3200 Symbol Rate Low
Carrier setup in V.34
mode
Used to set Enable/Disable of Low/High carrier when selecting 3000Hz as
Symbol Rate of V.34. When this is set to Disable, Low of 3200Hz is not
selected. It is valid only in transmission.
0 Enable
6 3200 Symbol Rate High
Carrier setup in V.34
transmission
Used to set Enable/Disable of Low/High carrier when selecting 3000Hz as
Symbol Rate of V.34. When this is set to Disable, High of 3200Hz is not
selected. It is valid only in transmission. When both of Low/High are set to
Disable, Symbol Rate=3200Hz is not selected.
0 Enable
7 3429 Symbol Rate Mask
in V.34 transmission
Used to set whether 3429Hz is used as Symbol Rate of V.34 or not.
When set to Disable, 3429Hz is not selected. Valid only in transmission.
0 Enable
8 Communication error
sound setting when no
response from the
remote machine in FAX
reception
Used to set whether the speaker sound is made or not according to the
communication error sound when the FAX signal cannot be received (when the
remote machine is a telephone in no response) from the remote machine in
FAX reception (call-in).
0 No error
sound
SW
No.
Bit
No.
Item Switch selection and function USA Initial value Key
operator
1: V.34 mode function
disable
0: V.34 mode function
enable
Bit No. 3456
2400 0 0 0 0
2400 0 0 0 1
2800/2400 0 0 1 0
3000/2800/2400 0 0 1 1
3200/3000/2800/2400 0 1 0 0
3429/3200/3000/2800/2400 0 1 0 1
1: Disable 0: Enable
1: Disable 0: Enable
1: Disable 0: Enable
1: Disable 0: Enable
1: Disable 0: Enable
1: Disable 0: Enable
1: Error sound provided 0: No error sound
[06]SIMULATIONS ･ FAXSOFTWARESWITCH.fm 40 ページ ２００４年１０月２６日 火曜日 午後３時４４分