Service manual

3-5

CHAPTER 3 INSTALLATION

V. ASSEMBLING METHOD

A. Assembly of printer main body

Removing the protective materials

1) Peel off the protective tapes (5) and the slip of paper from the front part of the printer,

and also peel off the protective tapes (2) from the back of the printer.

2) Draw out the paper cassette.

3) Pull out the retainer forward.

4) Open the top cover by pressing the OPEN button.

5) Detach the stopper release (Orange) while pressing down the lever (Blue) of the fuser unit

in the direction of arrow 1.

Note!

Instruct the user of the printer to be sure to keep the stopper release, which is used for

transporting the printer, at hand.

Slip of paper

Protective Tape

OPEN button

Paper cassette

Retainer

Stopper release (Orange)

Lever (Blue) of fuser unit