Service manual

5-38
CHAPTER 5 MAINTENANCE MENUS
Description Level
Ready
LED
Attention
LED
LCD (English)
(■
■
means no display in upper line)
Varies
Varies
Varies
On
Varies
Varies
Varies
Off
PU flush error (Error occurs during the alteration of PU
farm or it failed in the alteration in PU flush of such as
LED Head information.)
*** is below;
PU
PU SUB-CPU
TRAY2
DUPLEX
Indicates that a job has been deleted because corruption
of data has been detected by the integrity verification in
authentication printing.
Invalid data was received. Press the On-line switch and
eliminate the warning. Displayed when unsupported PDL
command is received or a spool command is received
without HDD.
Manual paper feed is required. Manually insert the paper
shown by %MEDIA_SIZE%.
The unit of paper size in Custom: The unit specified for
MPTray (menu setting) is used if no unit is specified by
the driver. When the driver specifies a unit, the unit is
used for display.
Paper size displays in Custom mode:
"<width>x<length><unit>"
ex.) 210x297mm
8.5x11.0inch
The unit of paper size in Custom: The unit specified for
MPTray (menu setting) is used if no unit is specified by
the driver. When the driver specifies a unit, the unit is
used for display.
Warning
Warning
Warning
Warning
■
■
PU FLASH ERROR
PRESS ONLINE SW
INVALID SECURE DATA
PRESS ONLINE SW
INVALID DATA
LOAD %MEDIA_SIZE% IN MP TRAY
AND PRESS ONLINE SWITCH