Liquid Crystal Display TV User Manual

17
Connecting a PC
Refer to page 59 for a list of PC signals compatible with the TV.
■
When using HDMI cable (HDMI 1, 2, 3 or 4):
HDMI OUT
Back panel
vertical inputs
HDMI-certified cable
• Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMI-certifi ed cable
to the HDMI 1 terminal, connect a Ø 3.5 mm stereo minijack cable to the AUDIO IN terminal and set "Audio Select" to
"HDMI+Analog". (See page 59.)
•
The HDMI terminals only support digital signal.
■
When using DVI-HDMI conversion cable (HDMI 1):
DVI OUT
AUDIO
Back panel
vertical inputs
DVI-HDMI conversion cable
Ø 3.5 mm stereo minijack cable
• When using a DVI-HDMI conversion cable, you should make an analog audio connection. In this case, in addition to
connecting a DVI-HDMI conversion cable to the HDMI 1 terminal, connect
a Ø 3.5 mm stereo minijack cable to the AUDIO IN
terminal and set "Audio Select" to "HDMI+Analog". (See page 59.)
■
When using analog RGB cable (PC IN):
AUDIORGB
Ø 3.5 mm stereo minijack cable
Analog RGB cable
(D-sub 15-pin cable or VGA cable)
Back panel
vertical inputs
• When using an analog RGB cable, input the audio signal to the AUDIO IN terminal of PC IN.
• When connecting a PC to the PC IN, set "Audio Select" to "Video+Audio". (See page 59.)
Connecting to External Equipment
LC-52_60LE925UN_E.indb 17LC-52_60LE925UN_E.indb 17 2010/07/20 18:41:132010/07/20 18:41:13