Service manual

LC-40/46/52/60LE810UN (1st Edition)

2 – 3

[2] OPERATION MANUAL

Confirm that there are 9 screws (5 short screws

and 4 long screws) supplied with the stand unit.

Attach the supporting post for the stand unit onto

the base using the box for the stand unit as shown

below.

The supporting post attaches to the base at an off-

centered location on the base. Be sure to attach the

supporting post in the direction indicated below and

attach the stand to the TV with the wider side of the

base facing forward.

Long screws

Insert the stand into the openings on the rear of the

TV.

Soft cushion

•

Attaching the Stand

• Before attaching (or detaching) the stand, unplug the AC cord.

• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.

CAUTION

• Attach the stand in the correct direction.

• Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.

• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.

Insert and tighten the 4 screws into the 4 holes on

the rear of the stand unit.

Short screws

Insert the stand cover.

Insert the screw to secure the stand cover.

Short screw

• To detach the stand, perform the steps in reverse

order.