Operating instructions

On-Screen Display Menu
6 During the data checking, "Checking" blinks.
7 Press ENTER to start updating.
o The screen becomes dark for a while until the update
screen can be displayed. Phase wait for the update
screen to appear. Do not unplug the AC cord.
o The current version of the TV software and the version
of the update file on the USB memory device are
displayed. To update the TV software with the update
fib, select "Yes", and then press ENTER.
Example
o if the USB memory device is not properly instalbd or
the correct update fib cannot be tound on the USB
memory device, an error message is displayed.
o Check the fib on the USB memory device, and then
reinsert the USB memory device correctly.
!!
Example
• DO not remove the USE} memory device or unplug the
AC cord while the software is being updated.
8 When the software is successfully updated, a
screen is displayed indicating that the update
process is completed.
After this screen is displayed, the TV automatically
turns off and then turns on again.
Exam
o If the update has tailed, check the file in the USB
memory device and try Sol.are Update again.
g After the screen shown below is displayed, press
ENTER.
10 Remove the USB memory device.
27