Flat Panel Television User Manual

On-Screen Display Menu
AV Mode
Adjust the best picture appearance from
selecting the preset value of Standard,
Movie, Power Saver, User, or Dynamic..
Color Temperature
For a better white balance, use color
temperature correction.
Warm:
White with reddish tone
Standard:
Cool:
White with bluish tone
• User:
White balance can be adjusted manually
through the R/G/B Gain between a
maximum of 255 and a minimum of
0 for each color temperature.
Advanced Video
Provide various advanced functions for
optimizing the picture quality.
DNR
DNR (Digital Noise Reduction) enables you
to “soften” the screen representation of
a weak signal to reduce the noise effect.
Select effect degrees from Low, Medium,
Adaptive Luma Control
Automatically adjusts the brightness and
contrast after analyzing the input signal.
This function enriches the colors and the
depth of the picture.
Flesh Tone
You can adjust the skin color to be more
natural.
HDMI Mode
HDMI Mode only shows and is available
when HDMI device is connected. Select
from Auto, Graphic, or Video.
Auto:• The HDMI input timing is set
to Video mode or Graphic mode
automatically
Graphic:• HDMI input timing set to
Graphic mode (PC). The image is full
scan
Video:• HDMI input timing set to Video
mode. The image is over scan.
HDMI Mode is only workable for HDMI •
Video & Progressive timing as followed:
1920x1080p,1280x720p,720x480p,
720x576p.
Adaptive Backlight
When Adaptive Backlight is activated, it
will automatically optimize the backlighting
levels for dark scenes.
VGA
The VGA adjustment is only available
when the input source is PC and your
TV is receiving a computer signal. Select
Auto Adjust for adjusting the settings
automatically, or select H. Position,
V. Position, Phase or Clock and use
or to adjust your preference.
while user select the input source to be “
PCIN” or “DTV(HD)”.
◄►
VGA
VGAAmbient Light Sensor
Deg a natural looking picture whether you
are watching movies late at night or playing
video games during the day with am Ambient
Light Sensor that automtically adjust the
backlight based on a room’s lighting.
32
Medium.The DNR function was disabled
Strong or Off. The default setting is