LC-20S5U LIQUID CRYSTAL TELEVISION OPERATION MANUAL

24
CH SETUP
■
EZ SETUP
When you move to an area with different broadcasting
signals, you may have to set the channel numbers and the
time with the EZ SETUP function. To activate EZ SETUP,
perform the following procedure.
1
Press
'
/
"
to select “CH SETUP” in the SETUP screen (see
page
19), and press ENTER.
2
Press
'
/
"
to select “EZ SETUP”, and press ENTER
.
3
Press
'
/
"
to select “YES”, and press ENTER
.
Refer to page 14 for more information on EZ SETUP.
■
Setting the AIR/CABLE
It is necessary to set the receiving mode to AIR or CABLE
channels to receive locally broadcast TV programs.
Press MENU to display the Menu screen.
Press
\
/
|
to select “SETUP”.
Press
'
/
"
to select “CH SETUP”, and press ENTER
.
Press
'
/
"
to select “AIR/CABLE”, and press ENTER
.
Press
'
/
"
to select the desired setting, and press
ENTER
.
E Z S E T U P
A I R / C A B L E A I R
C H S E A R C H
C H M E M O R Y C A B L E
Press MENU to exit.
A
• Receivable channels of the LCD TV set are:
AIR channels: CABLE channels:
VHF: 2 through 13. 1 (HRC and IRC)
UHF: 14 through 69. 2 through 125 (STD, HRC and IRC)
Useful Features
■
Saving broadcast TV channels in the memory
Repeat steps
1 to 3 of Setting the AIR/CABLE.
Press
'
/
"
to select “CH SEARCH”, and press ENTER
.
E Z S E T U P
A I R / C A B L E
C A B L E 1
C H S E A R C H
C H M E M O R Y
Press ENTER. The tuner will search through all available
channels in your area and add them to the TV memory.
S T E R E O
S A P
M O N O
2
A
•
To interrupt CH SEARCH, press MENU RETURN. CH SEARCH will
stop at the current channel and will not add any higher channels.
■
Adding weak or additional channels or erasing
unwanted channels from TV memory
Individual settings of programs can be adjusted.
Repeat steps 1 to 3 of Setting the AIR/CABLE.
Press
'
/
"
to select “CH MEMORY”, and press
ENTER.
E Z S E T U P
A I R / C A B L E
C H A N N E L A I R 2
C H S E A R C H
S K I P O N
C H M E M O R Y
Press
'
/
"
to move the cursor to “CHANNEL”, and use
\
/
|
or Channel Select to select the desired channel
to be added or erased.
Press
'
/
"
to move the cursor to “SKIP”, and use
\
/
|
to select “ON” or “OFF”.
Press MENU to exit.
A
• If CH SEARCH is performed again, the previously memorized
channels will be lost.
4
1
2
5
3
2
1
3
5
2
4
3
1
LC-20S5U_E.indb 24 2005/12/15 11:19:27