User Manual

117117
117117
117
SCANNING
12
12.12.
12.12.
12.
SCANNINGSCANNING
SCANNINGSCANNING
SCANNING
Scanning an imageScanning an image
Scanning an imageScanning an image
Scanning an image
Before you can scan images using the AL-F_FO from a TWAIN-compatible applica-
tion, you must install the supplied SHARP TWAIN interface software. This software
is automatically installed at the same time you install the SHARP printer driver provided
on CD-ROM. See
INSTALLING THE PRINTER DRIVER SOFTWAREINSTALLING THE PRINTER DRIVER SOFTWARE
INSTALLING THE PRINTER DRIVER SOFTWAREINSTALLING THE PRINTER DRIVER SOFTWARE
INSTALLING THE PRINTER DRIVER SOFTWARE on page
104.
●
Be sure to read “Readme” in the printer driver group before scanning
images from application programs.
●
When using the FO-3800M as a scanner, you must make sure
that your computer Printer Port is configured for ECP mode. If the
computer is set to a mode other than ECP mode, change the
ECP mode. The method for setting ECP mode differs depending
on your computer. Refer to the documentation for your computer.
●
Refer to the TWAIN help for more information.
●
For information about the state of operation panel indicators when
using the scanner function, see
Indicators on the operation panelIndicators on the operation panel
Indicators on the operation panelIndicators on the operation panel
Indicators on the operation panel
on page 112.
●
Preheat mode and auto power shut-off mode will be canceled
when scanning is started.
●
When scanning more than one original from the SPF with “Reverse
Order” selected, you need enough free space on the hard disk
(Up to 180MB of free space).
SUK 12 SCANNING LEO.p65 17/04/00, 13:31117