User Manual

45
RESETTING THE USER DEFAULT SETTING
3
Press the "ENTER" button.
The settings saved as the user default settings will return to the values of the
factory default setting.
The following message will appear for one second after the "ENTER" button is
pressed. The unit will soon return to be ready.
PROGRAM TIMEOUT
The following settings will return to the user default settings when the unit is left idle for the
specified period after the last copying operation; colour mode, copy quality, brightness,
intensity, zoom, and original type. (See the previous page) Follow the steps shown below to
set the time to elapse before switching over to the program timeout function
1
Press the "MENU" button, and keep pressing the (or )
"ARROW" buttons until "Program Timeout" is shown on the
first line of the display panel.
2
Keep pressing the (or ) "ARROW" button until the desired
value appears on the second line of the display panel.
Select the desired value from "1. 60 seconds"(Default setting), "2. 90 seconds",
"3. 30 seconds" and "4. 15 seconds" setting values.
3
Press the "ENTER" button.
A checkmark ( ) will be added to show the selected setting. After displaying the
selected value for one second, the display will return to the ready message.
Resetting feature
defaults
...
5.Program Timeout
1.60 seconds