Specifications

MX-3610N MAINTENANCE 8 – 4
3. Maintenance list
Main unit (18cpm machine)
✕: Check (Clean, replace, or adjust according to necessity.) : Clean : Replace : Adjust ✩: Lubricate
Section/Unit
work sequence
Name Unit name
Work
sequence
Part name
When
calling
80
k
160
k
240
k
320
k
400
k
480
k
Remark
Monochrome
consumable
Developing
section
Developing unit
(monochrome)
1 Developer ✕ 
2DV seal ✕ ✕✕✕✕✕✕Replace as needed.
3 DV side seals F/R ✕ ✕✕✕✕✕✕Replace as needed.
4 Toner filter ✕ ✕✕✕✕✕✕Replace as needed.
5 Bias pin ✕ ✕✕✕✕✕✕
6 Connector ✕ ✕✕✕✕✕✕
OPC drum
section
OPC drum unit 1 Drum ✕ 
2 Cleaning blade ✕ 
3 Toner reception
blade
✕ 
4 Side seals F/R ✕ ✕✕✕✕✕✕
5 Charger cleaner ✕ Integrated as a drum kit.
Section/Unit
work sequence
Name Unit name
Work
sequence
Part name
When
calling
50
k
100
k
150
k
200
k
250
k
300
k
Remark
Color
consumable
Developing
section
Developing unit
(color)
1 Developer ✕ 
2DV seal ✕ ✕✕✕✕✕✕Replace as needed.
3 DV side seals F/R ✕ ✕✕✕✕✕✕Replace as needed.
4 Toner filter ✕ ✕✕✕✕✕✕Replace as needed.
5 Bias pin ✕ ✕✕✕✕✕✕
6 Connector ✕ ✕✕✕✕✕✕
OPC drum
section
OPC drum unit 1 Drum ✕ 
2 Cleaning blade ✕ 
3 Toner reception
blade
✕ 
4 Side seals F/R ✕ ✕✕✕✕✕✕
5 Charger cleaner ✕ Integrated as a drum kit.
Section/Unit
work sequence
Name Unit name
Work
sequence
Part name
When
calling
80
k
160
k
240
k
320
k
400
k
480
k
Remark
1RPSF
section
RSPF unit 1 Document pickup
roller
 Replace at 80K of the
SPF paper feed counter or
1 year of use.
When replacing the paper
feed roller, apply grease to
the paper feed shaft.
GP-501MR
(UKOG-0013QSZZ)
2 Paper feed rooller  
3 Separation roller  
4 Torque limiter SPF ✕ ✕✕✕✕✕✕Replacement reference:
Replace referring to the
paper feed counter value.
SPF section torque limiter:
Replace at 400K or
2 years of use.
5 Take-up torque
limiter
✕ ✕✕✕✕✕✕
6 Discange brush ✕ ✕✕✕✕✕✕
7 Registration roller  
8 Transport roller 2  
9 Transport roller 3  
10 Paper exit roller  
11 Sensors ✕ ✕✕✕✕✕✕
12 Scan plate  
13 Gears ✕ ✕✕✕✕✕✕
14 Belts ✕ ✕✕✕✕✕✕
15 OC mat  
2 Scanner
section
Scanner unit 1 Drive belt ✕ ✕✕✕✕✕✕
2 Drive wire ✕ ✕✕✕✕✕✕
3Sensors ✕ ✕✕✕✕✕✕
4 Rails ✩ ✩✩✩✩✩✩
5 Mirror  
6Reflector  
7 Scanner lamp  
8 Lens  
9 CCD  
10 Table glass  
11 SPF glass  