Operation Manual

ENGLISH
E-11
• During operation, if the outdoor temperature
changes, the temperature settings will auto-
matically slide as shown in the chart.
• Mode of the unit operated first will have
priority over other unit(s) without reference
to the chart.
TIPS ABOUT AUTO MODE
In the AUTO mode, the temperature setting and mode are automatically selected according to
the room temperature and outdoor temperature when the unit is turned on.
Modes and Temperature Settings
TIPS ABOUT INDICATOR PANEL
The indicator panel will change each time you press
the DISPLAY button in the following manner.
The room
temperature and
POWER MONITOR
are displayed.
The outdoor
temperature and
POWER MONITOR
are displayed.
No display.
POWER MONITOR
When the room temperature or the outdoor temperature is displayed, the POWER MONITOR
will light up in 4 levels for COOL and HEAT modes (3 levels for DRY mode), to indicate the
operation power. When the air conditioner is operating at maximum power in the COOL and
HEAT modes, "POWER" will light and "ECO" will turn off on the indicator panel.
NOTES:
• The displayed temperatures are rough estimates and may vary from the actual tempera-
tures.
• Temperature display ranges
Room temperature: 0°C ~ 40°C ( is displayed when less than 0°C and when higher
than 40°C)
Outdoor temperature: -9°C ~ 45°C ( is displayed when less than -9°C and when
higher than 45°C)
• is displayed during the first 120 seconds of operation while the temperatures are being
detected. (Temperature detection may more than 120seconds when other unit(s) is/are
already being operated.)
• is displayed for 5 seconds when the unit is not in operation.
DISPLAY
FULL
POWER
the figures in ( ) are temperature settings
ECO
ECO
Room Temp.
Lamp
Outdoor Temp.
Lamp
temperature
Indiactor
POWER
MONITOR
ECO
ECO
Room Temp. Lamp
Outdoor Temp. Lamp
temperature
Indiactor
POWER MONITOR
(AY-XPM7CR/AY-XPM9CR/AY-XPM12CR)
(AY-XM7CR/AY-XM9CR/AY-XM12CR)