User`s guide

RX100 S4 Options Guide 27
7 Non-hot-plug hard disks
V CAUTION!
Observe the safety instructions in the chapter “Safety notes” on page 11
et seq. .
7.1 Installing a second non-hot-plug SATA hard
disk
Ê Open the server as described in the chapter “Preparation” on page 17 et
seq. .
Figure 10: Removing the dummy cover
Ê Remove the dummy cover from the bay.
V CAUTION!
Keep the dummy cover for future use. If you remove the accessible drive
again and do not replace it with a new one, the dummy cover must be
reinstalled to comply with EMC regulations and to satisfy cooling require-
ments and fire protection measures.