User Manual

Standard DIN45325
plug (IEC169-2)
75-ohm
coaxial cable
(round cable)
(not supplied)
300-ohm
twin-lead
flat feeder
(not supplied)
75-ohm
impedance
converter
(not supplied)
Antenna in
TV
Antenna in
TV
VCR
To antenna
in terminal
To RF out
terminal
Connecting to a DVD player
The DVD input terminals (COMPONENT-IN) on the rear of the TV can be used to input high-
quality images from a DVD player.
If your outdoor antenna uses a 75-ohm coaxial
cable with a standard DIN45325 plug (IEC 169-2),
plug it into the antenna jack at the rear of the set.
• When using the RF terminal connection, set the TV to channel zero to make initial adjustments for the VCR.
E2 BEFORE OPERATING TELEVISION
Connecting to an antenna
Connecting to an antenna via a VCR
E3 CONNECTING AND WATCHING DVD
If your outdoor antenna uses a 300-ohm twin-lead
flat feeder, connect a 300-ohm to 75-ohm
impedance converter and plug it into the antenna
jack at the rear of the set.
Connecting the video terminals
DVD input terminals DVD player
COMPONENT-IN
VIDEO
Y Y or Y/Y
PB(CB)
PB(CB) or
B-Y/Pb
PR(CR)
PR(CR) or
R-Y/Pr
Watching DVD
! Press
TV/VIDEO
to select “COMPONENT”, DVD
input screen.
@ Turn on the DVD player and begin playback.
• When connecting the TV to a DVD player via the
COMPONENT-IN terminals, the video and audio from the
DVD player cannot be output through the Audio/Video out
terminals on the TV.
TV
DVD input terminals
To colour-difference
(component video)
out terminals
To audio out
(L/R) terminals
DVD player
Green : To Y
Blue : To P
B (CB)
Red : To P
R (CR)
Red : To AUDIO IN (R)
White : To AUDIO IN (L)
COMPONENT
LANGUAGE TV/VIDEO
SURROUND
CH
CH
NORMAL
123
456
78
0
9
MENU
BACD
MPX
TV/VIDEO