Product Manual

Shar k
®
J etters OPERATOR’S MANUAL
3
SJHE-1500 & SJPE-1650 • 8.914-322.0 • REV. 11/12
INTRODUCTION
Thank you for purchasing a Shark
®
Jetters
This manual covers the operation and maintenance of
models SJHE-1500 and SJPE-1650. All information in
this manual is based on the latest product information
available at the time of printing.
Shark
®
Pressure Washers reserves the right to make
changes at any time without incurring any obligation.
Owner/User Responsibility:
The owner and/or user must have an understanding of
the manufacturer’s operating instructions and warnings
before using this machine. Warning information should
be emphasized and understood. If the operator is not
fluent in English, the manufacturer’s instructions and
warnings shall be read to and discussed with the opera-
tor in the operator’s native language by the purchaser/
owner, making sure that the operator comprehends its
contents.
Owner and/or user must study and maintain for future
reference the manufacturers’ instructions.
SAVE THESE INSTRUCTIONS
This manual should be considered a permanent part
of the machine and should remain with it if machine
is resold.
When ordering parts, please specify model and
serial number. Use only identical replacement parts.
This machine is to be used only by trained operators.
MACHINE SAFETY
CAUTION: To reduce the risk of
injury, read operating instruc-
tions carefully before using.
1. Read the owner's manual thor-
oughly. Failure to follow instruc-
tions could cause malfunction
of the unit and result in death,
serious bodily injury and/or
property damage.
2. All installations must comply with local codes. Con-
tact your electrician, plumber, utility company or the
selling distributor for specific details. To comply with
the National Electrical code (NFPA 70) and provide
additional protection from risk of electric shock, the
machines are equipped with a UL approved ground
fault circuit interrupter (GFCI) power cord.
WARNING: Flammable liquids
can create fumes which can ig-
nite causing property damage or
severe injury.
WARNING: Risk of explosion --
do not spray flammable liquids.
3. Risk of explosion - do
not spray flammable liquids or
operate in an area where flammable or explosive
materials are used or stored.
WARNING: Keep water spray
away from electric wiring or fatal
electric shock may result.
4. To protect the operator from
electrical shock. The machine
is equipped with a Ground Fault
Circuit Interuptor (GFCI). The
use of an additional extension
cord by the operator should not
be used as it will not provide protection to the opera-
tor of electrical shock. The machine must be electri-
cally grounded. It is the responsibility of the owner to
connect this machine to a UL grounded receptacle of
proper voltage and amperage ratings. Do not spray
water on or near electrical components. Do not touch
machine with wet hands or while standing in water.
Always disconnect power before servicing.
5. Grip cleaning wand or hose securely with both hands
before starting the cleaner. Failure to do this could
result in injury from a whipping wand or hose.
WARNING: High pressure stream
of fluid that this equipment can
produce can pierce skin and its
underlying tissues, leading to
serious injury and possible
amputation.
6. High pressure developed
by these machines will cause
personal injury or equip-
ment damage. Use caution when operat-
ing. Do not direct discharge stream at peo-
ple, or severe injury or death will result.
7. Never make adjustments on machine while in
operation.
WARNING: High pressure spray
can cause paint chips or other
particles to become airborne and
fly at high speeds.
8. Eye safety devices, foot pro-
tection and protective clothing
must be worn when using this
equipment.
KEEP WATER SPRAY
AWAY FROM ELEC-
TRICAL WIRING.
WARNING
READ OPERATOR’S
MANUAL
THOROUGHLY
PRIOR TO USE.
CAUTION
HIGH PRESSURE
SPRAY CAN PIERCE
SKIN AND TISSUES.
CAUTION
WARNING
RISK OF EXPLOSION:
DO NOT USE WITH
FLAMMABLE LIQUIDS.
WARNING
USE PROTECTIVE
CLOTHING WHEN
OPERATING.