User Manual

sharkclean.comsharkclean.com

CHARGING THE BATTERY

Remove the handheld vacuum from the wand by

pressing the Wand Release button and pulling

up. Plug the charger into the charging port on the

handheld vacuum.

Plug the Li-Ion Charger into a wall outlet.

To put the vacuum in storage mode, press the

MultiFLEX Wand Unlock Latch while folding the

handheld vacuum forward until the wand clicks and

locks. Plug the charger into the charging port on the

handheld vacuum.

NOTE: Battery can only be charged in the vacuum.

NOTE: MultiFLEX wand is not included with all conﬁgurations. See enclosed Quick Start Guide for your unit’s conﬁguration.

OPTION 1 – IN HANDHELD VACUUMLI-ION CHARGER

OPTION 2 – MULTIFLEX® STORAGE MODE

POWER SETTINGS

NOTE: For deep cleaning per ASTM F 608 (embedded dirt in carpets) please use setting II, Carpet. The Carpet setting

should also be used when cleaning stuck-on dust and debris.

Slide switch to the top to turn o power.

To begin vacuuming in Standard Mode, slide switch

to the desired setting.

Bare Floor/Small Area Rugs

Use this setting to clean bare ﬂoors and small

arearugs.

Carpet

Use this setting to pick up debris below the surface

ofyour carpets.

For an added boost in power, pull the Trigger

on the handheld vacuum. Release it to return to

standard power.

OFF BARE FLOOR SETTING

CARPET SETTING BOOST MODE