User's Manual

2 of 9 rev 1.2
Remote Control
The Colorspree APP is free and available for both Android and iOS devices. The name of the
APP is:
Colorspree by TCP
The APP requires Bluetooth 4.0 on your hardware. Please refer to your device documentation
to ensure the APP is compatible. Generally, the APP stores will inform you prior to download of
compatibility issues.
Initial Use
1. Install the Colorspree LED bulb.
The bulb will function like a normal light bulb with
a wall switch. You will know that the bulb is on
because it is emitting light.
2. With the bulb powered ON, start the APP.
The first time you use the APP, you will need to
select a language and enter a 4 digit PIN. The
PIN is shared with a new light bulb so that others
cannot control your light bulb. This is a one time
process, and you may change it at a later time.
3. Control the Flashing Bulb
i. When the APP finds a new Colorspree bulb,
the bulb should start to flash.
ii. Enter a new name for the bulb if you wish. You may change the name at a
later time.
iii. Select the Control button. Your device now will add this light bulb to your
APP and you will be able to control it remotely.
iv. You may also choose to Ignore a bulb if the APP finds a bulb and it is not
yours or you do not wish to add it to your device.
Additional Bulbs